Pd30hp High Pressure Auger Drive

Flow Range: 15-240 lpm, Max Torque (Nm) @ 345 bar: 30250, Motor: Radial Piston, Pressure Valve Fitted: Optional, Case Drain Atmospheric Vent: Included, Energy Control Valve: N/A, Case Drain Required: Yes, Max Pressure (Bar): Do not exceed 345 Bar @ 174 lpm, Max Flow (lpm): Do not exceed 240 lpm @ 230 Bar, Power (Kw): Do not exceed 90 Kw (121HP), Overall Length (mm): 1221, Diameter (mm): 460, Weight (No linkage and hitch): 453, Output Shaft: 100mm Square,Swing Control (SCS): N/A, Diggalign (Auger Alignment): Optional, Recommended Auger: 11 Series, Max Auger Dia Clay/Shale* 1500mm, Max Auger Dia Earth* 1800mm. *Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.

PD3HP Drives used for drilling have a 5 year gearbox warranty, 3 year motor warranty and 1 year manufacturer warranty from Digga which covers defects in materials and workmanship Drives used for Anchoring fitted with an ECV (Energy Controle Valve) carry a 3 year gearbox warranty, 2 year motor warranty and 1 year manufacturer warranty. Drives used for Anchoring up to 16,000Nm-without ECV carry 2 year gearbox warranty, 1 year motor warranty and 1 year manufacturer warranty. Warranty Guidlines Warranties are subject to approval from Grease Works & Digga Warranty repairs are not to be carried out without pre-approval from Grease Works & Digga Maintenance must be carried out as per the operator's manual to maintain warranty Do not disassemble a Digga product before getting approval and instructions from Digga Ensure attachments are utilised only for their intended use. If you have a problem with any of your product and you believe they are covered by warranty please contact Grease Works