Recommended Flow: 40-150 lpm, Max Torque (Nm) @ 240 bar: 9916, Motor: Vis EATON, Pressure Valve Fitted: Included, Energy Control Valve: Optional, Case Drain Required: Yes (Included), Max Pressure: Do not exceed 240 Bar @ 150 lpm, Max Flow: Do not exceed 180 lpm @ 200 Bar, Max Continuous Power: Do not exceed 60 Kw (80HP), Overall Length (mm): 952, Diameter (mm): 340, Overall Width (mm): 392, Weight (No linkage and hitch): 159, Output Shaft: 75mm Square, Swing Control (SCS): N/A, Diggalign (Auger Alignment): Optional, Recommended Auger: 8 Series, Max Recommended Dia Clay/Shale*: 1000mm, Max Recommended Dia Earth*: 1500mm. *Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.
Warranty
PDT10HF Drives used for drilling have a 5 year gearbox warranty, 3 year motor warranty and 1 year manufacturer warranty from Digga which covers defects in materials and workmanship
Drives used for Anchoring fitted with an ECV (Energy Controle Valve) carry a 3 year gearbox warranty, 2 year motor warranty and 1 year manufacturer warranty.
Drives used for Anchoring up to 16,000Nm-without ECV carry 2 year gearbox warranty, 1 year motor warranty and 1 year manufacturer warranty.
Warranty Guidlines
Warranties are subject to approval from Grease Works & Digga
Warranty repairs are not to be carried out without pre-approval from Grease Works & Digga
Maintenance must be carried out as per the operator's manual to maintain warranty
Do not disassemble a Digga product before getting approval and instructions from Digga
Ensure attachments are utilised only for their intended use.
If you have a problem with any of your product and you believe they are covered by warranty please contact Grease Works
Shipping
The PDT10HF two speed drilling auger drives for high flow machines have been designed for a wider range of applications. Offering a high speed, low torque setting for the smaller auger jobs when you need that extra RPM, and low speed, high torque for when you really need to grind out that larger diameter hole. It's like having 2 drive units in 1. Two speed drives suit excavators & skid steer loaders, truck cranes, front end loaders, wheeled loaders, and backhoes with flows between 40 and 180 lpm. This unit has 75mm square hub and does not include hoses. Check the specifications table to see if this drive unit is suitable for your machine.
