Sd95 Auger Drive

SpecificationsWarrantyShipping

• Application

  Recommended Flow: Up to 380 lpm, Max Torque (Nm) @ 240 bar: 91215, Motor: Radial Piston, Pressure Valve Fitted: Included, Energy Control Valve: Optional, Case Drain Required: Yes (Included), Max Pressure: Do not exceed 240 bar @ 380 lpm, Max Flow: Do not exceed 380 lpm @ 240 bar, Max Continuous Power: Do not exceed 150 Kw (201 hp), Overall Length (mm): 1493, Diameter (mm): 600, Weight (No linkage and hitch): 843, Output Shaft: 100mm Square, Swing Control (SCS): N/A, Diggalign (Auger Alignment): Optional, Recommended Auger: 10 & 11 Series, Max Recommended Dia Fract. Rock*: 1500, Max Recommended Dia Clay/Shale*: 1500mm, Max Recommended Dia Earth*: 1800mm. *Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.

• Warranty

  SD95 Drives carry a 1 year gearbox warranty, 1 year motor warranty and 1 year manufacturer warranty from Digga which covers defects in materials and workmanship Warranty Guidlines Warranties are subject to approval from Grease Works & Digga Warranty repairs are not to be carried out without pre-approval from Grease Works & Digga Maintenance must be carried out as per the operator"e;s manual to maintain warranty Do not disassemble a Digga product before getting approval and instructions from Digga Ensure attachments are utilised only for their intended use. If you have a problem with any of your product and you believe they are covered by warranty please contact Grease Works

• Shipping

   

SELECT ADDITIONAL OPTIONS:

• Sd95 auger drive with excavator ryno hitch:$45,719
• Request for alternative options
• Need a custom made part?

• 
  $38,723 Including GST $45,719 Including GST $0 $0